Parameters | |||
---|---|---|---|
CPU | NXP i.MX6D | Architecture | ARM Cortex-A9 |
Frequency | 1.0GHz | RAM | DDR3 SDRAM, 4*256MB, total 1GB |
Flash | 4GB EMMC | Ethernet | AR8035 Network Chip, adopt RGMII mode, support 10M/100M/1000M) |
UART | 5*RS232 (1*Debug, 2*RS232 Compatible with RS485) | CAN | 2*CAN, support CAN2.0, 1*TTL Output, 1*CAN output |
USB | 1*USB OTG, 4*USB HOST (Including 1*USB connects to MIN_PCIE Interface) | I2C | Standard I2C Capacitive Panel |
Camera | CAMERA Interface, standard interface support OV5642 camera module | Display Interface | TFT-LCD MAX.1920 * 1200; VGA; 2*LVDS, MAX.1920*1200; HDMI, support HDMI 1.4 |
Audio | McASP Audio Interface; Binaural Output; MIC Audio Input | Input Interface | 4-Wire Resistive Touch Panel |
Extension Interface | MINI_PCIE 2.0; SIM Card | Storage interface | 1*SD Card; 1*SATA Hard Disk Interface, SATAII Standard, speed up to 3.0Gbps |
Other | Reset Circuit, Watchdog, RTC, Buzzer, JTAG interface | Power Supply | +12V Power Supply, supports +4.75V~+18V Wide Range Voltage Supply |
Operating System | Linux/Android | Size | 160mm*105mm |
Power Consumption | ≤3W | Operating Temperature | -20℃ ~ +70℃ (-40 ~ +85℃ Opt.) |
Working Humidity | 5% ~ 95%, non-condensing |
Specification | |||
---|---|---|---|
J1 | +12 Power Input | J2 | Serial Port & CAN |
J4 | BOOT Mode Selection | J5 | SPI & 2*4GPIO |
J7 | BOOT Mode Selection | J6 | Debug Port |
J8 | JTAG Debug | J10 | USB OTG |
J11 | 2*USB HOST | J12 | USB, support external module |
J13 | Gigabit Ethernet | J14 | SD Card |
J15 | HDMI | J16 | LVDS |
J17 | LVDS | J18 | LCD Power Supply |
J19 | Capacitive Touch Screen Interface | J21 | LCD_TTL |
J22 | CAMERA | J24 | VGA |
J25 | MIC Audio Input | J26 | Audio Output |
J27 | SATA | J28 | SATA Hard Drive Power Interface |
J29 | MINI-PCIE | J30 | SIM Card |
J31 | RS485 & GPIO | J32 | +5V Power Output |
J33 | Audio Output | SW1 | Dial Switch |
BT1 | System Clock Power upply (+ 3.0V) | BZ1 | Buzzer |
K1 | Reset Button |